View 2F1G23CP_4729652.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

CATV Line Amplifier
Product Features
* GaAs Push Pull * Extremely Low Distortion * Guaranteed Broadband Power Gain * Excellent Thermal Conductivity * Single Supply Voltage @ 24V * Low DC Power Consumption * Optimal Reliability
2F1G23CP
Application
* CATV Trunk Amplifier * Optical Drive Amplifier
Package Type : SOT-115J
Description
Hybrid Push Pull amplifier for CATV Systems up to 1000MHz in frequency. This hybrid amplifier module operates with a single voltage supply of 24V (DC), and use GaAs MMIC technology.
Quick Reference Data
SYMBOL
Gp
PARAMETER Power gain
CONDITIONS
F = 45 MHz F = 1000 MHz
MIN.
21 21.5 200
MAX.
24 24.5 250
UNIT
dB dB mA
Itot
Total current consumption (DC)
Vcc = 24V
Limiting Values
SYMBOL Vi V Tstg Tmb PARAMETER RF Input Voltage (Single Tone) DC Supply Over Voltage (5 minutes) Storage Temperature Operating Mounting Base Temperature -40 -20 MIN. MAX. +70 28 +100 +100 UNIT dBmV V
Tel : 82-31-250-5011 rfsales@rfhic.com
All specifications may change without notice. Version 1.0
CATV Line Amplifier
CHARACTERISTICS
2F1G23CP
Bandwidth 45 to 1000MHz; VCC = 24V; Tcase = 25; ZS = ZL = 75
SYMBOL
Gp SL FL
PARAMETER
Power gain Slope cable equivalent Flatness of frequency response
CONDITIONS
f = 45 MHz f = 1000 MHz f = 45 to 1000 MHz f = 45 to 1000 MHz f = 45 to 250 MHz
MIN
21 21.5 18.0 17.0 16.0 15.0 20.0 18.0 16.0 15.0 200
TYP
22.5 23.0 0.5 4.5 4.5 5.5 220
MAX
24 24.5 0.5 5.5 5.6 6.5 250
UNIT
dB dB dB dB dB dB dB dB dB dB dB dB dB dB dB mA
S11
Input return loss
f = 250 to 500 MHz f = 500 to 750 MHz f = 750 to 1000 MHz f = 45 to 250 MHz
S22
Output return loss
f = 250 to 500 MHz f = 500 to 750 MHz f = 750 to 1000 MHz f = 45 MHz
F
Noise Figure
f = 550 MHz f = 1000 MHz
Itot
Total current consumption (DC)
DISTORTION
SYMBOL
CTB XMOD CSO
Notes;
Bandwidth 45 to 1000MHz; VCC = 24V; Tcase = 25; ZS = ZL = 75
PARAMETER
Composite triple beat Cross modulation Composite second order distortion
CONDITIONS
135 channel flat; Vo = 38dBmV 135 channel flat; Vo = 38dBmV 135 channel flat; Vo = 38dBmV
MIN
-
TYP
-65 -65 -66
MAX
-60 -60 -63
UNIT
dBc dBc dBc
135 Channels, NTSC frequency raster: 55.25MHz to 859.25MHz, +38dBmV flated output level. CTB, XMOD, CSO definitions follow NCTA definition
ESD PROTECTION
Gallium Arsenide Integrated Circuits are sensitive to electrostatic discharge (ESD) and can be damaged by static electricity. Proper ESD control techniques should be used when handling these devices. Some of the precautions recommended are; - Person at a workbench should be earthed via a wrist strap and a resistor. - All mains-powered equipment should be connected to the mains via an earth-leakage switch. - Equipment cases should be grounded. - Relative humidity should be maintained between 40% and 50%. - An ionizer is recommended. - Keep static materials, such as plastic envelopes and plastic trays etc. away from the workbench.
Tel : 82-31-250-5011 rfsales@rfhic.com
All specifications may change without notice. Version 1.0
CATV Line Amplifier
NOTES FOR CORRECT USE
1. 2.
2F1G23CP
On the power input port (Pin#5), 47uF/35V capacitor GND is recommended. The heat sink of CATV Hybrids is to be mounted in direct contact with the metal case of the equipment. Heat conducting grease should be applied to the module/equipment interface and the unit tightly secured. Put the power off before adjusting in/output matching of the system. The unit must have a common ground with the equipment and the analyzer. Pay close attention to the input voltage not to over power the hybrid. The space between bottom of socket and the tip of the lead is recommended to have space of 2mm+ to protect the pin Do not open the plastic cover to change the matching inside the hybrid. Once opened, RFHIC will not be responsible for the hybrid.
3. 4. 5. 6.
47
+
+24V
7.
Package Dimensions (Type: SOT-115J)
Pin No.
1 2, 3, 7, 8 5 9
Function
RF Input Ground Vcc RF Output
RFHIC Corporation (RFHIC) reserves the right to make changes to any products herein or to discontinue any product at any time without notice. RFHIC do not assume any liability for the suitability of its products for any particular purpose, and disclaims any and all liability, including without limitation consequential or incidental damages. The product specifications herein expressed have been carefully checked and are assumed to be reliable. However, RFHIC disclaims liability for inaccuracies and strongly recommends buyers to verify that the information they are using is current before placing purchase orders. RFHIC products are not intended for use in life support equipment or application where malfunction of the product can be expected to result in personal injury or death. Buyer uses or sells such products for any such unintended or unauthorized application, buyer shall indemnify, protect and hold RFHIC and its directors, officers, stockholders, employees, representatives and distributors harmless against any and all claims arising out of such use. RFHIC's liability under or arising out of damages, claims of whatsoever kind and nature which RFHIC products could cause shall be limited in amount to the net purchase price of the products sold to buyer by RFHIC.
Tel : 82-31-250-5011 rfsales@rfhic.com
All specifications may change without notice. Version 1.0

▲Up To Search▲

Price & Availability of 2F1G23CP

	To Download 2F1G23CP Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .